Diesel Vanagon Specific Tools
This page serves to help others locate the proper tool to do the job. Please add and create more areas if need be.
Contents
Resources
Popular VW Diesel tool websites:
Generic
Water-Pump Pully holder
The proper tool for removing the water-pump pulley on AAZ, 1z/AHU it can be found on the ebay or amazon links below that look for VW 96280, SCH96280, UN1203280
1z/AHU Crank Counterhold Tool
IDParts - MetalNerd Crank Bolt Counter Hold Tool all I4cyl VWs
1z/AHU Injector Slide Hammer Puller (long)
IDParts - MetalNerd long slide hammer for 1z/AHU for pulling injectors - This is really good if engine is out of van and you're on a stand. This gives you a lot more umph to get a frozen injector out.
1z/AHU Injector Slide Hammer Puller (short)
Amazon - ABN 3124 Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover w/ M8, M12, M14 Thread Adapter - This is a shorter version that works really well for removing injectors out of a Westy (damn cabinet!)
1z/AHU Injection Pump Sprocket Puller
IDParts - MetalNerd - Injection Pump Sprocket Puller for 1z/AHU
Timing
TDC
Timing Belt Tool Kits
1z/AHU
IP Timing
Mechanical IP
The all mechanical bosch VW Pumps can be timed via a VW speciality tool and a dial gauge.
VW Specialty tool Diesel Timing Tool (Gauge Holder) 2066 - This can be located via ebay and other sellers. Try to find the authentic OE VW made one. Not all "compatible" ones fit. The holder is around $40-$60 and sometimes you can get one with a dial gauge for $80-$100.
You also need a 0-10mm by 0.01mm Metric Dial Indicator which you can find with search criteria below:
eTDI
The best tool hands down for diagnostics and even some changes on a VW eTDI is VCDS